The AR Engineering
master cylinder heat shield is an excellent addition to any engine
compartment. This very simple part attaches using the same two
studs which mount the master cylinder. The V shaped design is
simple yet strong and it protects the master cylinder from header
heat. Reducing the temperature of the brake fluid is important
since it can prevent the possibility of boiling the fluid under
hard use conditions. Even in normal street driving, the reduced
temperature of the brake fluid will result in a longer life for
the seals and boots within the master cylinder. Heat kills, keep
your master cylinder cool with the AR Engineering heat shield
To see this heatshield in a typical application Click Here
